Reading The Default Setting Value/ Esc~Sl - Citizen PD24 Command Reference Manual

Reading the default setting value/ ESC~SL

[ASCII]
[Decimal]
[Hexadecimal]
[Description]
● Reads the default value of printer's internal setting. The difference between factory setting values and
default setting values is that while factory setting values are set during manufacturing, default setting
values are set when the user changes the internal setting of the printer and settings are stored in the internal
setting user area of the flash memory.
● This command is used in conjunction with the flash memory writing command (ESC~SS) and the internal setting
command (ESC~SI).
ESC~SL←Reads the default value
ESC~SI···←Sets the internal setting of the printer.
ESC~SI···←Sets the internal setting of the printer.
ESC~SI···←Sets the internal setting of the printer.
ESC~SS←Writes the setting for flash memory.
ESC ~ S
27 126 83
1B 7E 53
L
76
4C
45