Turn Power Off; Automatic Power-Off Function - Citizen CH607 Instruction Manual

Do not move or talk while taking the blood pres-
sure measurement.
4) When pressurization is completed, the auto-
matic air release system will gradually reduce
cuff pressure, and measuring mark "Heart-
mark" will flash on the display indication that
measuring is in progress.
5) After taking blood pressure measurement, the
systolic and diastolic pressure with pulse rate
is displayed on the display for 1 minute.
6) Unless an error is generated, the measurement
results are automatically stored in memory. Up
to 99 sets of results can be stored in memory.
* When there are already 99 sets of results in
memory, the oldest one is automatically erased
and overwritten with the newest. Display of the
measurement result will continue until power is
turned off.
CAUTION
To discontinue a measurement for any reason,
press the "START/STOP" switch. This causes
the "wrist cuff" to deflate rapidly.

3. Turn Power off

When the Start/Stop switch is pressed, the dis-
play will be changed over to the date/watch only
indication and the power will be totally turned
off approximately one minute later.

4. Automatic power-off function

If the unit is left on after measurement, an auto-
matic power-off function turns the power off af-
ter approximately 1 minute. To continue mea-
surement, press the "START/STOP" switch turn-
ing the unit on. After, wind the wristlet around
your left wrist.
- Eng 11 -