Measurement Procedures - Citizen CH607 Instruction Manual

by one. The value of minute can be corrected
in only the forward direction.)
2) Press the "Mode" switch then "Date" starts
flashing. Press "SET" button to set the cor-
rect date. (Each time the "Set" switch is
pressed, the value of the date is increased by
one. The value of hour can be corrected in
only the forward direction.)
3) Press the "Mode" switch then "Hour" starts
flashing. Press "SET" button to set the cor-
rect date. (Each time the "Set" switch is
pressed, the value of the Hour is increased by
one. The value of hour can be corrected in
only the forward direction.)

MEASUREMENT PROCEDURES

1. Attaching of wrist cuff
The blood pressure is measured at the wrist.
Therefore, rolling up the sleeve is no longer
necessary. The pressure cuff has integrated into
the wristlet. Wind the wristlet around your left
wrist. The wrist should be free. The display is
at the inner of the wrist.
4) Press the "Mode" switch then "Minute" starts
flashing. Press "SET" button to set the cor-
rect Minute. (Each time the "Set" switch is
pressed, the value of the minute is increased
by one. The value of Minute can be corrected
in 12-hour format in only the forward direc-
tion.)
5) Press the mode switch to finish correction.
- Eng 9 -