Automatic Power Off Feature - Citizen CH-461C Instruction Manual

4
Finishing measurement.
[Manual pressurization]
• Keep "START/STOP" switch held pressed until
the pressure value you want to stop pressurization
is reached (approximately 40mmHg higher
than the Systolic blood pressure). You can stop
pressurization by the unit by releasing the switch at the
aforementioned value is reached.
The upper pressure limit is 280mmHg

AUTOMATIC POWER OFF FEATURE

• After taking the blood pressure measurement, pressing the "START/STOP" switch
will turn the monitor off. However, if you do not press the switch, the monitor's
Auto OFF function will automatically turn the monitor off after 3 minutes.
MEASURING YOUR BLOOD PRESSURE
• Press "START/STOP" switch to turn
the monitor off.
* When you want to stop measurement,
press "START/STOP" switch. The
air in the cuff is exhausted to stop
measurement.
- Eng 19 -