Turn Power On - Citizen CH-308B Instruction Manual

3.1 Turn Power On

Push the cuff tube and Pumping bulb tube over the air connectors.
Pumping bulb tube
Cuff Tube
PULSE / min
SYSTOLIC mmHg DIASTOLIC mmHg
All display mark appear for approx. 1 second and buzzer beeps.
MEASUREMENTS
Press the "Power" switch for
Power on.
SYSTOLIC mmHg DIASTOLIC mmHg
After all display marks are disappeared, the last measured systolic
and diastolic blood pressure values are displayed.
(Value of Pulse is not memorized nor displayed).
Memory function works on for approximately 2 second or during
depressed the "Power" switch.
SYSTOLIC mmHg DIASTOLIC mmHg
After memorized blood pressure value is disappeared, deflation
mark "M" appears.
SYSTOLIC mmHg DIASTOLIC mmHg
If there is some air remaining in the cuff, release air with the ex-
haust button until the "0" appears. The buzzer beeps three times.
The unit is now ready to take new measurement.
- Eng 6 -
PULSE / min
PULSE / min
PULSE / min