Double Receipts; Double Receipt Setting; To Issue Double Receipts - Royal 410DX Instruction Manual

DOUBLE RECEIPT SETTING

( 12 ) - ( Status ) - [ Void ]
1 Digit
Status: 0 = Double receipt enable (Default Value = 0)
1 = Double receipt disable
Example: ( 12 ) - ( 1 ) - [ Void ]

TO ISSUE DOUBLE RECEIPTS

Pressing [ amount tend TOTAL ] key re-prints the receipt.
Data to be accumulated in RAM to enable this feature is 60 lines. In the event that data exceeds 60 lines, only total
amount is to be printed.
{ TRANSACTION }
{ TENDER }
[ amount tend TOTAL ] --> Print receipt
Example: reg-1 Mode:
( 100 ) - [ DEPT 1 ] ( 1 ) - [ PLU ]
[ amount tend TOTAL ]
[ amount tend TOTAL ] --> Re-prints receipt
Example: reg-2 Mode:
( 100 ) - [ DEPT 1 ]
( 1 ) - [ PLU ]
[ amount tend TOTAL ]
[ amount tend TOTAL ]--> Prints first receipt
VOID/CORR 1.21
22

DOUBLE RECEIPTS