Settings; Mixer Page - RME Audio Fireface UFX User Manual

27.8 Settings

The dialog Settings can be opened via the Options menu or directly via F3.

27.8.1 Mixer Page

On the mixer page some typical settings for the mixer operation are set, like Talkback source,
Dim amount when Talkback is active, the stored main volume or the input used for the External
Input function.
Talkback
Input. Selects the input channel of the
Talkback signal (microphone in control
room). Default: None.
Dim. Amount of attenuation of the
signals routed to the Phones in dB.
Listenback
Input. Selects the input channel of the
Listenback signal
recording room). Default: None.
Dim. Amount of attenuation of the
signals routed to the Main Out in dB.
Main Out
Recall. User defined listening volume,
activated by the Recall button at the
unit or in TotalMix.
Dim. Amount of attenuation for the
Main Out in dB.
External Input. Selects the stereo
input that replaces the mix signal on
the Main Out when activated. The
volume of the stereo signal is adjusted
by the slider Gain.
(microphone in
User's Guide Fireface UFX © RME
71