Operation Under Asio; General; Channel Count Under Asio - RME Audio Fireface UFX User Manual

10. Operation under ASIO

10.1 General

Start the ASIO software and select ASIO Fireface USB as the audio I/O device or the audio
driver.
The Fireface UFX supports ASIO Direct Monitoring (ADM).
The Fireface UFX MIDI I/O can be used with both MME MIDI and DirectMusic MIDI.

10.2 Channel Count under ASIO

At a sample rate of 88.2 or 96 kHz, the ADAT optical input and outputs operate in S/MUX mode,
so the number of available channels per port is reduced from 8 to 4.
At a sample rate of 176.4 and 192 kHz, the ADAT optical input and output operates in S/MUX4
mode, so the number of available channels is limited to 2.
Note: When changing the sample rate range between Single, Double and Quad Speed the
number of channels presented from the ASIO driver will change too. This may require a reset of
the I/O list in the audio software.
Single Speed
Fireface Analog 1 to 12
Fireface AES L / R
Fireface ADAT 1 to 16
Double Speed
Fireface Analog 1 to 12
Fireface AES L / R
Fireface ADAT 1 to 8
User's Guide Fireface UFX © RME
Quad Speed
Fireface Analog 1 to 12
Fireface AES L / R
Fireface ADAT 1 to 4
25