Removing And Replacing The Base Bezels - HP Kayak XU 04xx User Manual

Removing the Base Bezels
Lay the computer on its side.
(a) On the side base bezel, push the
two tabs upwards, then pull the base bezel
towards you.
(b) Turn the computer on to its other
side, and repeat the steps mentioned
above to remove the second side base
bezel.
Replacing the Base Bezels
With the computer in its upright position,
line- up the two tabs and the two small plastic
locaters with their respective locations. Gently
insert the front base bezel until it clicks into
place.
Lay the computer on to its side.
(a) Line up the four plastic guide tabs on the
side base bezel with their respective locations.
(b) Place your hands on each end of the side
base bezel, then press it downwards until the four
plastic guide tabs clear the guide ridge. Push the
side base bezel forwards until it clicks into place.
Turn the computer on its other side, and repeat the
steps mentioned in step to install the second side base
bezel.

Removing and Replacing the Base Bezels

Removing and Replacing the Base Bezels
Return the computer to its upright position.
Push the two tabs on the front base bezel
outwards, then pull the base bezel towards you.
16
(a)
(b)
(a)
(b)