HP Kayak XU 04xx User Manual page 13

Installing a
Single Processor
Insert the processor into the BOOT
PROC processor socket until it clicks into
place. Do not install a processor for a single
processor system in the DUAL PROC
processor socket.
Insert the VRMs into the VRM
sockets 1 and 2 (from left to right).
Replace the airflow guide and
reconnect the fan to the system board.
Replace the metal retaining plate that
secures the processor(s) and tighten the
four self-retaining screw.
Removing and Installing a Processor
VRM 2
VRM 1
13