Removing And Replacing The 8-Bit Scsi Protection Clip - HP Kayak XU 04xx User Manual

Removing and Replacing the 8-bit SCSI Protection Clip

Removing and Replacing the 8-bit SCSI Protection Clip
Removing the 8-bit SCSI Protection Clip
Refer to page 10 for instructions on how to remove and replace the cover.
DO NOT PULL the 8-bit SCSI Protection clip
directly out. The clip be broken.
Press the tab on the right-hand side of the 8-bit SCSI
protection clip and pull outwards at the same time.
Replacing the 8-bit SCSI Protection Clip
Insert the clip in the hole on the left-hand side
Push inwards the tab on the right-hand side, while
at the same time inserting the clip in the hold.
Push the 8-bit SCSI protection
clip until it clicks into place.
17