Complete the Questionnaire to Check Your Understanding
Before installing or replacing a component, do I need to use a
13
wrist strap and ESD mat?
Yes, you do. Electrostatic Discharge (ESD) can damage proces-
a
sors, memory, hard disk drives, accessory boards and other com-
ponents.
No, you do not have to. The ESD package is non-conductive and
b
are now manufactured with a special anti-static product.
How do I identify whether an HP Kayak XU has a Matrox
14
Millennium II, a Matrox Millennium G200, or an ELSA GLoria
Synergy+ video board?
Check the Support label on the back of the box.
a
Check the part number on the back of the box.
b
Check the video connector.
c
Can I upgrade a Matrox Millennium II video board using SGRAM
15
memory modules?
Yes, you can. SGRAM memory modules are compatible with both
a
the Millennium II and Millennium G200 video boards.
No, you cannot. Millennium II uses WRAM memory modules, while
b
the Millennium G200 uses SGRAM modules.
Yes, you can. SGRAM memory modules are only used in the
c
Millennium II video boards.
How do I identify whether an HP Kayak XA-s has a Matrox
16
Millennium G100, a Matrox Millennium G200, or an ELSA
GLoria Synergy+ video board?
Check the Support label on the back of the box.
a
Check the part number on the back of the box.
b
Check the video connector.
c
38