Installing The Opengl Graphics Drivers; On The Hp Kayak Xw Series U3 And W3 Pc Workstation; Configuring The Acceleclipse Opengl Driver - HP Kayak XA-s 02xx Manual

NOTE

Installing the OpenGL Graphics Drivers

Installing the OpenGL Graphics Drivers

On the HP Kayak XW Series U3 and W3 PC Workstation

OpenGL graphics drivers are available for both the AccelEclipse and
Visualize FX4 video controllers for use under Windows NT4.0 only. Without
the appropriate drivers, the PC Workstation will only operate in VGA mode,
meaning that the 3D hardware accessory will not be available.
Graphics drivers are regularly updated by Hewlett-Packard for feature and
performance improvements. When installing a driver, or diagnosing an error,
you are strongly recommended to check that you have the latest driver
version. These can be found on the HP World Wide Web site:
http//www.hp.com/go/kayaksupport
Installing the OpenGL Graphics Drivers
Installation of the drivers is done through the standard process:
Display Properties / Settings / Display Type

Configuring the AccelEclipse OpenGL Driver

Once the driver is installed, an 'AccelEclipse' tab is added to the Display
Properties dialog box.
Driver
version
20
Advanced users:
further options
are available on
the System
Settings tab
Select the
application to be
used
Select Factory
Settings to reset
all driver options
to the default
settings
Click the
Configure button
to modify driver
options