HP Kayak XA 05xx Installation Manual page 22

HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Minitower PC
Workstation
Installing Accessory Boards
4 Unscrew and remove the slot cover. Store it in a safe place.
If the slot cover is tight, loosen the screws on the adjacent slots.
Unscrew and remove
the slot cover
5 Hold the board horizontally by its "top" edge. Slide it into the board
guide of the chosen slot. Do not bend the board.
Slide the accessory
board into position
6 Align the board's connector with the slot's socket. Firmly press the
board into the socket. Ensure the board's connector engages
completely with the socket and does not touch components on
other boards.
22 English