HP Kayak XA 05xx Installation Manual page 13

HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Minitower PC Workstation
8 Locate the appropriate data cable for the hard disk drive.
IDE drives should be connected to a
free IDE connector on the IDE cables
(you can add up to four IDE devices).
Up to 15 SCSI devices can be
connected to the internal and
external SCSI connectors.
9 Connect the power cable and the data cable to the rear of the drive.
(The connectors are shaped to go in one way only.)
Data Cable
10 Install any other accessories before completing the installation.
11 Turn to page 16 to complete the installation.
Wide SCSI devices should be
connected to a free SCSI connector on
the SCSI cable.
Installing Mass Storage Devices
Power Cable
English
13