HP Kayak XA 05xx Installation Manual page 23

HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Minitower PC Workstation
Completing the
Installation of an ISA
Accessory Board
NOTE
7 Secure the board by replacing the slot cover screw.
If you loosened the screws on adjacent slots, remember to tighten
them.
Secure the board
in position
8 Install any other accessories before replacing the cover (see page
4). Reconnect all cables and power cords.
If you have installed an ISA accessory board that uses any interrupt,
you must run the Setup program and reserve the IRQ for the
accessory board.
1 Turn on the PC Workstation and press
2 In the Setup program, select the
submenu. A list of IRQs and the devices that use them are
Exclusion
displayed. Highlight the IRQ field you want to change, for example
.
IRQ 11
3 You can use the space bar or press
available for PCI (
( ).
Reserved
4 Press to save any changes you made and exit the Setup program.
F3
You should always leave at least one IRQ available for use by the
integrated PCI devices.
Advanced
F7
) or make it unavailable for PCI
Available
Installing Accessory Boards
when
F2 F2 Setup
menu and the
ISA Resource
or to make the IRQ
F8
appears.
English
23