Systems Insight Display Leds - HP DL585 - ProLiant - G2 User Manual

Systems Insight Display LEDs

The front panel health LEDs indicate only the current hardware status. In some situations, HP SIM might
report server status differently than the health LEDs because the software tracks more system attributes. The
System Insight Display LEDs identify components experiencing an error, event, or failure.
The Systems Insight Display LEDs are located on the media board. In normal operations, all of the LEDs
are off unless one of the components fails.
IMPORTANT:
page 16), leave the server powered on. The Systems Insight Display LEDs are cleared when
the server is powered off.
NOTE:
provide pre-failure and warranty conditions.
LED
PS1
PS2
CPU BD (Power Fault)
I/O BD
NMI
SLOT X
CPU BD (Interlock Error)
PPM X
1A–32D
PROC X
FAN X
See the HP ProLiant DL585 Generation 2 Server Maintenance and Service Guide on the Documentation
CD for more information.
When removing the access panel to view the Systems Insight Display LEDs (on
The system management driver must be installed for the internal system health LED to
Component
Power supply (primary)
Power supply (optional)
Processor memory module board
System board
System NMI switch
Expansion slot
System board
Processor power module
DIMM slot
Processor
Fan
Component identification 16