The external health LED
The internal health LED
NOTE:
For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
Improperly seated or faulty power supply
Loose or faulty power cord
Power source problem
Power on circuit problem
Improperly seated component or interlock problem
Faulty internal component
Item
Refer to
1
"Component identification (on page 6)"
2
"HP Insight Diagnostics (on page 61)" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website (http://www.hp.com/support)
3
"Loose connections (on page 67)"
4
Server maintenance and service guide, located on the Documentation
CD, or the HP website (http://www.hp.com/products/servers/platforms)
5
"Integrated Management Log (on page 61)" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website (http://www.hp.com/support)
6
"Power source problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(http://www.hp.com/support)
7
"Power supply problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(http://www.hp.com/support)
Server maintenance and service guide, located on the Documentation
CD, or the HP website
(http://www.hp.com/products/servers/platforms)
8
"System open circuits and short circuits" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
website (http://www.hp.com/support)
("Systems Insight Display
("Systems Insight Display
LEDs" on page 16) is red or amber.
LEDs" on page 16) is red or amber.
("Systems Insight Display
LEDs" on page 16)
Troubleshooting 72