Track Exchange; Executing Track Exchange - Fostex D2424LV Reference Manual

Model D2424LV Reference Manual (Editing Tracks)
"Track exchange" is the function that exchanges tracks -- all real tracks and all additional tracks--
currently in the programs, in mono track units or in multiple track (Stereo pair 2 tracks; 8 track
units) units.
In other words, exchanging tracks in any combination, as shown below, means that data recorded
on those tracks will be relocated. This function enables effective use of tracks. Not only will it be
possible to make exchanges between real tracks but, by dumping a real track to a blank additional
track, another blank real track is created for future recording.
However, since data in this additional track cannot be directly played back in real time, if the data
need to be played back or edited, it must be moved to a real track.
Also, as explained in the previous "Erase," "Track Exchange" is necessary when checking REC END in
the additional track.
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
<Note>
In the " Format conversion of the additional track " menu of the SETUP mode, the range of tracks that can be exchanged will
be 1-24 in the current drive in which the " V2 (56) " format was converted to " V1 (24) " format. For details on the "Format
conversion of the additional track" menu, refer to the SETUP mode on page " 132 ."
• Execution of Track Exchange
<Note>
You can carry out the track exchange function only
when the " Chain Play? " menu in the Setup mode is set
to " Off ." If you press the [EDIT] key when this menu is
not set to " Off ," " Void Chain Play! " is shown and the op-
eration is ignored.
If " Void Chain Play! " is shown, set the " Chain Play? " menu
to " Off ."
1. In the stop mode, press the [EDIT] key to display
"TRK Exch.Mono?" or "TRK Exch.Group?."
Select "TRK Exch.Group?" to exchange tracks in 2 track
(stereo pair)/8 track units, and "TRK Exch.Mono?" to
exchange in mono track units.

Track Exchange

Exchange in 8 track units
Exchange in 2 track (stereo pair) units
Track 9
Track 10
Track 11
Track 12
Track 13
Track 14
Track 15
Track 16
Exchange in mono track units
Exchange in 8 track units
74
Track 17
Track 18
Track 19
Track 20
.........................
Track 21
Track 22
Track 23
Track 24
• Exchanging in group units
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7 8 9 10 11
• Exchanging in mono units
OL
0
3
6
9
12
18
24
30
42
1 4 5 6 7 8 9
2 3 10 11
2. After either is displayed, press the [EXECUTE/
YES] key.
The display will change to selecting the tracks for
exchanged. To actually select the tracks, please refer
to the next page.
Track 49
Track 50
Track 51
Track 52
Track 53
Track 54
Track 55
Track 56
Flashing
OL
BIT
0
3
6
9
12
18
24
30
42
12 13 14 15 16 17 18 19 20 21 22 23 24
Flashing
OL
BIT
0
3
6
9
12
18
24
30
42
12 13 14 15 16 17 18 19 20 21 22 23 24
24
FS
kHz
CLOCK
INT
24
FS
kHz
CLOCK
INT