Table of Contents
Advertisement
Quick Links
8360
Model
(Ether card for the Model D2424 / D2424LV)
Table of Contents
Introduction ...............................................................................2
Installing the ether card ............................................................2
FTP client application ...............................................................2
Connecting to a personal computer .......................................3
One to one connection ..............................................3
Connection to an existing LAN .................................4
TCP/IP setting (recorder's initial setting) ...............................5
IP address setting .......................................................6
Subnet mask setting ..................................................6
Anonymous setting ...................................................7
Login name (password) setting ...............................7
Ether mode setting ....................................................8
Personal computer setting ......................................................9
TCP/IP setting ............................................................9
Setting for connection ..............................................9
Transferring files .....................................................................10
Getting files from the recorder ..............................10
Putting files to the recorder ...................................11
Notes on transferring files .....................................................11
Owner's Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fostex 8360
Summary of Contents for Fostex 8360
-
Page 1: Table Of Contents
8360 Model Owner’s Manual (Ether card for the Model D2424 / D2424LV) Table of Contents Introduction ...2 Installing the ether card ...2 FTP client application ...2 Connecting to a personal computer ...3 One to one connection ...3 Connection to an existing LAN ...4 TCP/IP setting (recorder's initial setting) ...5... -
Page 2: Introduction
Introduction Thank you very much for purchasing the Fostex product. The Model 8360 is an ether card dedicated for the D2424/D2424LV digital multitrack recorder. By installing the 8360 to the recorder, it can be used as an "FTP (File Transfer Protocol) server". -
Page 3: Connecting To A Personal Computer
There are two types for connecting the recorder to a personal computer using the LAN cable; one to one connection and LAN connection. The following describes how to make connection for each type. One to one connection To connect the recorder to a personal computer on a "one to one" basis, use a "cross cable of category 5 or higher"... -
Page 4: Connection To An Existing Lan
Connection to an existing LAN To connect the recorder to an existing LAN, use a "straight cable of category 5 or higher" for connection between the recorder and a hub, as shown below. <Note> When connecting the recorder to an existing LAN, set the IP address and subnet mask correctly. Other- wise, whole LAN system may have a trouble. -
Page 5: Tcp/Ip Setting (Recorder's Initial Setting)
Make the settings in the "TCP/IP Setup?" menu which is added to the setup mode of the recorder so that the Model 8360 can be used as an FTP server. 1. Turn on the recorder's power. 2. Press the [SETUP] key to enter the setup mode. -
Page 6: Ip Address Setting
IP address setting You must set the IP address for the recorder. 1. Use the JOG dial to bring up "IP Addr.?" and press the [EXECUTE/YES] key. The display shows the screen for entering the IP address. By default, it is set to "0. 0. 0. 0" and the leftmost 0 flashes. SETUP flashing SETUP... -
Page 7: Anonymous Setting
This setting selects whether the 8360 checks the user name and password or not when logging in. If it is set to "ON", the 8360 does not check the user name and password, so you can access (log in) to the recorder with any user name and password (in- cluding no name/password). -
Page 8: Ether Mode Setting
The display now shows "LoginName01 ?". Ether mode setting To activate the communication function of the Model 8360, you must set the ether mode to "ON". <Note> The settings previously described become effective when the ether mode is set to "ON". -
Page 9: Personal Computer Setting
Personal computer setting After completing the "TCP/IP Setup?" setting for the recorder, set the TCP/IP and connection settings for the personal computer. TCP/IP setting Set the IP address and subnet mask of the personal com- puter using the TCP/IP setting window of the personal computer. -
Page 10: Transferring Files
Transferring files After making all necessary settings described ear- lier, make the following setting for the FTP applica- tion you use before opening the connection to trans- fer files. [If you use WS-FTP] From "ASCII", "Binary" and "Auto" shown in the center of the window, select "Binary"... -
Page 11: Putting Files To The Recorder
Putting files to the recorder 1. Log in to the D2424/D2424LV from the personal computer via the network. 2. Select the program folder to which you are going to put the file. If you want to put the file to a new program, create a new folder. - Page 12 This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member nation's ordinance concerning the electromagnetic compatibility. This equipment is compatible only when connected to fostex specified product. The affect of the European Specification EN50082-1 (coexistence of electromagnetic waves - common immunity specification) on this equipment are as shown below.
Need help?
Do you have a question about the 8360 and is the answer not in the manual?
Questions and answers