Converting The Additional Track Format - Fostex D2424LV Reference Manual

Model D2424LV Reference Manual (Changing the Initial Setting <SETUP mode>)
Converting the additional track format ("Add. Trk Convert ?" menu)
A program created on the current drive formatted by the unit consists of 56 tracks ("V2 (56)" format): 24 real tracks
plus 32 additional tracks for a 44.1kHz/48kHz FS program, or 8 real tracks plus 48 additional tracks for an 88.1kHz/
96kHz FS program. The "Converting the additional track format" menu allows to convert the total number of tracks
(real track plus additional tracks) from 56 ("V2 (56)") to 24 ("V1 (24)") or vice versa.
This function gives compatibility to a hard disk, allowing you to use a hard disk with both "V2 (56)" format devices
(D2424LV/D824mkII/D1624mkII) and "V1 (24)" format devices (D824/D1624).
When mounting a hard disk, converted from the "V2 (56)" format to the "V1 (24)" format, to the D824 or D1624 (a "V1 (24)"
format device), the total number of real tracks plus additional tracks becomes 24.
An 88.1kHz/96kHz FS program of the D1624 consists of 8 real tracks plus 16 additional tracks.
24 Real Tracks
32 Additional Tracks
<Note>
When converting the format from "V2 (56)" to "V1 (24)," data on tracks 25 through 56 are deleted.
Even if you convert such a program back to "V2 (56)" from "V1 (24)", the lost data for tracks 25 through 56 cannot
be restored. When a converted hard disk is mounted on the D2424LV, all 24 tracks on a 44.1kHz/48kHz FS
program converted to "V1 (24)" are used as real tracks, therefore, no additional track exists.
1.While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
2.Turn the Jog dial to select "Add. Trk Convert?" ("?"
flashes), and then press the [EXECUTE/YES] key.
The display will change to a warning message when the
[EXECUTE/YES] key is pressed and the entire message
will be repeated twice in a flowing movement.
Upon ending display of the warning message, the display
will change to the one for executing the conversion and
"SURE?" will flash.
SETUP
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7 8 9 10 11
SETUP
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7 8 9 10 11
<Warning Message>
Caution! If This command is executed, all Multi.
Undo & add. trk 25-56 data will be deleted.
When mounting on the D1624
16 Real Tracks
8 Additional Tracks
Flashing
OL
BIT
0
3
6
9
12
18
24
30
42
12 13 14 15 16 17 18 19 20 21 22 23 24
OL
BIT
0
3
6
9
12
18
24
30
42
12 13 14 15 16 17 18 19 20 21 22 23 24
24 Real Tracks
32 Additional Tracks
SETUP
OL
0
3
6
9
12
18
24
30
42
1 2
<Display when converting V2 (56) to V1 (24)>
SETUP
OL
0
3
6
9
12
18
24
30
42
1 2
<Display when converting V1 (24) to V2 (56)>
24
Shown when a "V1 (24)" format hard disk is mounted.
FS
kHz
CLOCK
INT
3.Press the [EXECUTE/YES] key while pressing the
[RECORD] button.
Upon flashing converting, "COMPLETED!" will be lit.
SETUP COMPLETED!
OL
24
0
3
FS 6
9
kHz
12
18
CLOCK
24
INT
30
42
1 2
4.Press the [EXIT/NO] key or [STOP] button.
The display will change to the "Disk Optimize?" menu.
After converting by referring to page "34" "Optimizing
the disk", execute disk optimizing.
132
When mounting on the D824
16 Additional Tracks
SURE?
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
SURE?
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
8 Real Tracks
OL
24
BIT
0
3
FS
6
9
kHz
12
CLOCK
18
24
INT
30
42
21 22 23 24
OL
BIT 24
0
3
FS
6
9
kHz
12
18 CLOCK
24
INT
30
42
21 22 23 24
OL
24
BIT
0
3
FS
6
9
kHz
12
CLOCK
18
24
INT
30
42
21 22 23 24