Setting Cue Monitor Output Destination; Setting The Output Digital Signal Format - Fostex UR-2 Owner's Manual

Setting cue monitor output destination

You can select the output destination of the play-
back audio while cueing.
By default, cue playback audio is output from
the [ANALOG OUT], [DIGITAL OUT] and [PHONES]
connectors. It is also possible to output cue play-
back audio only from the [PHONES] connector.
The setting is stored to the internal flash ROM.
By using the [MENU] dial to highlight "Cue moni-
tor out" in the SYSTEM SETUP menu and press-
ing the [ENTER] key, the current setting starts
flashing and you can now select the destination
(the default setting is "ALL").
Use the [MENU] dial to select the destination be-
tween "ALL" and "HP", and press the [ENTER] key
to confirm the setting.
Cue playback audio is output from the [ANA-
LOG OUT], [DIGITAL OUT] and [PHONES]
ALL
connectors.
Cue playback audio is output from the
HP
[PHONES] connector.
To exit the [MENU] mode, press the [STOP] key
(or the [EXIT] key).
Model UR-2 <MENU mode / SYSTEM SETUP menu>
Flashing
-77-

Setting the output digital signal format

You can select the format of the digital signal
output from the [DIGITAL OUTPUT] connector.
By default, it is set to "AES/EBU" and the digital
signal conformed to the IEC 60958 (AES/EBU)
format is output. It is also possible to output the
digital signal conformed to the IEC 60958 (S/P
DIF). The setting is stored to the internal flash
ROM.
By using the [MENU] dial to highlight "Digital out"
in the SYSTEM SETUP menu and pressing the [EN-
TER] key, the current setting starts flashing and
you can now select the digital signal format (the
default setting is "AES/EBU").
Use the [MENU] dial to select the format between
"AES/EBU" and "SPDIF", and press the [ENTER]
key to confirm the setting.
Outputs the digital signal conformed to the IEC
AES/EBU
60958 (AES/EBU) format.
Outputs the digital signal conformed to the IEC
SPDIF
60958 (S/P DIF) format.
To exit the [MENU] mode, press the [STOP] key
(or the [EXIT] key).
Flashing