Advertisement
9. Power on AAM1008-61 and press any key within 3 seconds as indicated by the following figure.
10. Type "atnb" and then press Enter key on console window.
11. Wait for the firmware uploading to complete.
12. Use the following commands on AAM1008-61 to write the new firmware to flash memory.
-
192.168.1.1> flashfs
-
192.168.1.1 flashfs> update
13. Wait for the update to complete and then restart AAM1008-61.
Configuration Backup/Restore:
The AAM1008-61 uses FTP to backup/restore configuration through its built-in FTP server. You can
use any FTP client (for example, ftp.exe in Windows) to backup/restore AAM1008-61 configuration.
The procedure is as follows:
On management station:
C:\> ftp <AAM1008-61 IP address>
User name: <Enter>
Password: 1234
230 Logged in
ftp> get init
ftp> put init
ftp> quit
Where
User name:
Password:
get init:
put init:
On AAM1008-61:
After management station has successfully put the configuration file and quitted the FTP client
application for restoring configuration, one just waits for updating completion and then AAM1008-61
will reboot automatically. Do not power off AAM1008-61 while the updating process is in progress.
just press <Enter>
the management password, 1234 by default
backup the configuration into local file - init
restore the configuration by local file - init
Advertisement
