Removal Of The Footboard; Removal Of Handlebar Fairing - PEUGEOT Tweet Workshop Manual

Removal of the footboard

Range 6
- Remove the rear cover assembly. See:
Range 2. page 20.
- Remove the rear shield panel. See: Range 5.
page 22.
- Disconnect and remove the battery.
- Remove the footboard.
• 4 washer head screws. Ø6 mm (A).

Removal of handlebar fairing

Range 7
- Remove the rearview mirrors.
- Remove the handlebar front cover.
• 4 plastic screws (A).
• 1 Screw Ø6 mm. (Under the headlight) (B).
- Disconnect the lighting.
- Remove the front upper shield panel. See:
Range 3. page 21.
- Disconnect the speedometer cable (1).
- Disconnect:
• The main harness (2).
• The brake light switches (3).
• The horn (2).
• The flasher unit (2).
- Remove the handlebar rear cover and
instrument cluster assembly.
• 3 plastic screws (C).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
A
A
A
A
A
B
1
C
3
C
2
BODY PANELS
A
A
C
3 1
23