PEUGEOT Tweet Workshop Manual page 46

STEERING/FORK
- Pour 0.1 l SAE10W hydraulic oil into the fork
tube.
- Refit the other items in the reverse order to
disassembly. See chapter: Draining the front
fork page 39
- Install the spring (3).
- Install the cap.
- Install the retaining spring clip.
- Fit the fork tubes into the fork triple clamps.
- Fit and tighten the 4 fixing bolts (B).
Tightening torque: 28 Nm.
- Fit the front mudguard.
- Fit the speedometer drive gear assembly to
the wheel drive pins.
- Fit the wheel, matching the speedometer drive
gear assembly to the pin (A) on the fork
stanchion.
- Fit the wheel spindle and tighten.
When re-installing, use a new nut.
Tightening torque: 60 Nm.
- Refit the other items in the reverse order to
disassembly.
44
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
B
A