PEUGEOT Tweet Workshop Manual page 60

POWER UNIT
9
10
- Disconnect the transmisson cooling air
intake (9).
- Remove the linkrod-to-engine connecting
pin (10).
Tightening torque: 60 Nm
-
When re-installing, use a new nut
- Lift the rear of the machine.
- Remove the power propulsion unit from the frame.
- Remove the covers from the power unit.
58
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
.
.
- Remove the linkrod-to-engine connecting
pin (9).
Tightening torque; 60 Nm
9
.