BODY PANELS
BODY PANELS
Removal of the front shield panel.
Procedure 1.
- Remove the front upper shield panel
(3 screw).
Removal of front lower shield panels.
Procedure 2.
- Remove the front lower left shield panel (1)
(3 screws), including the 2 fixing it to the RH
shield panel
- Remove the front lower RH shield panel
(3 screw).
Removing the footboard and the LH
tunnel.
Procedure 3.
- Remove the 2 screws that hold the LH
footboard (1).
- Unclip the outer part of the footboard starting
at the rear.
- Unclip the footboard from the frame bottom.
- Raise the footboard by levering on the front
end (A) to release it from the rear shield panel.
12
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
1
A
1