Removal Of The Rear Shield Panel - PEUGEOT Tweet Workshop Manual

BODY PANELS
- Remove the mudguard (B).
• 4 plastic screws.
- Remove the front lower shield panel.
• 4 plastic screws (C).
• 1 Screw Ø6 mm (D).
- Disconnect the direction indicators.

Removal of the rear shield panel

Range 5.
- Remove the front lower shield panel. See:
Range 4. page 21.
- Remove the ingnition switch trim.
- Remove the utility hanger (1).
- Remove the rear shield panel.
• 2 plastic screws (A).
22
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
D
B
1
A
C
C