Maintenance; Troubleshooting - Electrolux EQBL100AS User Manual

Integrated barbecue
Hide thumbs Also See for EQBL100AS:
Table of Contents

Advertisement

Maintenance

The ignition system
To change the battery unscrew the cover. Lift out the spring
and battery. Replace with a new AA battery and replace
the cover. Do not over-tighten the screw cover as this may
distort the trim panel. Test by depressing the knob and an
audible 'clicking' sound should be heard.
NOTE
Ensure that the battery has been placed in the correct
orientation.
Air vents
The mounting enclosure air vents should be checked prior
to each use, to ensure they are clear of any obstructions
that may affect the free flow of air.
Stainless steel burners
cleaned as necessary. Inspect burners to ensure no
residues have been deposited and gas ports are clear.
electrolux integrated barbecue maintenance/troubleshooting 11

Troubleshooting

problem
light
Excess smoke
being emitted
from the cooking
area
Smell of gas
DO NOT
ATTEMPT TO
LIGHT THE
APPLIANCE
possible cause
remedy
No gas
Check isolation valve
is ON
Gas bottle empty – refill
or change gas bottle
Ignition system
Check battery – should
not working
hear a clicking noise
when the knob is
depressed
Replace battery
Manually light the
barbecue
Ignition electrode
Gently clean and dry
wet or dirty
electrode ensuring
position is correct
Gas valve set too
Turn gas valves down or
high
turn off selected burners
Gas leak
Turn off gas at the
isolation valves
Check for leaks, tighten
joints
If problem persists call
Electrolux Service

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eqbh100as

Table of Contents

Save PDF