Cleaning And Care - Electrolux EQBL100AS User Manual

10 cleaning and care electrolux integrated barbecue

Cleaning and care

The Electrolux Integrated barbecue has been constructed
from select grade stainless steel which, if not cared for, may
discolour over time. To keep your barbecue looking its best
we recommend that the cooking surfaces are cleaned after
every use.
warning
Please ensure that your barbecue is switched off and
has cooled down before following the instructions
below.
Cleaning of Stainless Steel components
Hot Plate and Grill
and hotplate using scraper or wire brush
removed with the hotplate. For stubborn stains, simply
soak the grill and plate components in hot soapy water
before rinsing thoroughly
Other stainless steel surfaces
caution
Do not use abrasive or caustic cleaners, scourers or
metal scrapers on these stainless steel surfaces as they
may permanently scratch and damage your barbecue.
slimline lid, the roasting hood and control knobs with a
soft dishcloth using hot soapy water
cloth in hot soapy water. The rear panel of the interior is
removable for easy cleaning
caution
Take extra care (particularly when cleaning on and
around the control knobs) to ensure that water and
soapy residue do not enter the control panel, where
the valves are or into the burners. Care should also be
taken not to disturb the spark electrode. A distance
of 5mm should be maintained between it and the
burners (see diagram below).
5mm
Cleaning the Oil Reservoirs
The Integrated barbecue has a unique oil management
system which uses overlapping channels to drain all oil
to the front into easily removed reservoirs and should be
cleaned after each use.
barbecue and dispose of the contents of the catchment
responsibly. Rinse oil reservoirs in warm soapy water.
The reservoirs can be placed in the dishwasher if
desired.
tips and information
Special note on "tea staining"
Sometimes stainless steel surfaces are affected by a brown
discolouration called tea staining. This usually occurs in
areas which use high heat and can be easily removed using
specialised stainless steel cleaners. For best results, we
recommend that specialised cleaners be used regularly on
all stainless steel components. You will find these cleaners
at most hardware stores.
tips and information
Special note on stainless steel
The stainless steel panels may distort while in use but will
return to normal when cold.