8 gas requirements/setting up the barbecue/ﬁtting the lid or hood electrolux integrated barbecue
Natural Gas requirements
be gained to the Natural Gas regulator at all times.
connected to 1.2m ﬂexible hose supplied and therefore
must be located within this distance
corresponding mating ﬁtting will be required at the gas
Universal LPG Requirements
under the barbecue unit, it must be isolated from
the barbecue unit with a non-combustible panel.
The enclosure must comply with the requirements of
Where of sheet metal or similar impervious construction
there shall be ventilation openings at the top and
bottom of the enclosure or recess, each opening
providing a free area of at least 200cm
front of enclosure removed
at least 30mm clearance
between bottom of
barbecue and barrier
Setting up the barbecue
Setting up the barbecue in mounting enclosure
on page 6, position the assembled barbecue into the
and leak test.
Fitting the slimline lid or roasting hood
Fitting of slimline lid
cut hole in non-
Fitting of roasting hood
for hose only
allen key supplied.
surround using allen key supplied.
that two people place the roasting hood into position.
care to avoid scratching of the external trim.
with same screws.