Making Copies; How To Copy; Entering Copy Mode; Printable Area - Brother MFC-9420CN User Manual

'
11

Making copies

How to copy

You can use your machine as a copier,
making up to 99 copies at a time.

Entering Copy mode

Before making copies, make sure that
(Copy) is illuminated in blue. If it is not,
press (Copy) to enter Copy mode. The
default setting is Fax mode. You can change
the number of seconds or minutes that the
machine stays in Copy mode. (See Mode
Timer on page 3-8.)
The LCD shows the default copy setting
Stack Copies:01
100%
Stack/Sort
Copy Ratio
Contrast
Auto
No. of Copies
Quality

Printable Area

The printable area of your machine begins at
approximately 0.12 in. (3 mm) from both
sides and 0.16 in. (4 mm) from the top or
bottom of the paper.
0.12" (3 mm)
0.16" (4 mm)

Making a single copy

1
Press (Copy) to illuminate it in
blue.
2
Load your document.
(See Loading documents on
page 2-10.)
3
Press Black Start or Color Start.
Note
To stop copying, press Stop/Exit.
Unprintable
area
11
11 - 1