Brother MFC-9420CN User Manual page 105

Hide thumbs Also See for MFC-9420CN:
Table of Contents

Advertisement

Chapter A
0
Do not place anything on top of the power
cord including this machine. Do not allow the
power cord to be stepped on.
A
If an extension cord is used with this product,
make sure that the total ampere ratings on
the products plugged into the extension cord
do not exceed the extension cord ampere
rating. Also, make sure that the total of all
products plugged into the AC power outlet
does not exceed 15 amperes (USA only).
B
Do not place anything in front of the machine
that will block received faxes. Do not place
anything in the path of received faxes.
C
Wait until pages have exited the machine
before picking them up.
D
Never push objects of any kind into this
product through cabinet slots, since they
may touch dangerous voltage points or short
out parts resulting in the risk of fire or electric
shock. Never spill liquid of any kind on the
product. Do not attempt to service this
product yourself because opening or
removing covers may expose you to
dangerous voltage points and other risks and
may void your warranty. Refer all servicing to
a Brother Authorized Service Center. For the
location of your nearest Brother Authorized
Service Center, please call
In USA: 1-800-284-4357
In Canada: 1-877-BROTHER.
(See Brother numbers on page i.)
A - 5
E
Unplug this product from the AC power outlet
and refer all servicing to Brother Authorized
Service Personnel under the following
conditions:
• When the power cord is damaged or
frayed.
• If liquid has been spilled into the product.
• If the product has been exposed to rain or
water.
• If the product does not operate normally
when the operating instructions are
followed. Adjust only those controls that
are covered by the operating instructions.
Improper adjustment of other controls may
result in damage and will often require
extensive work by a qualified technician to
restore the product to normal operation.
• If the product has been dropped or the
cabinet has been damaged.
• If the product exhibits a distinct change in
performance, indicating a need for service.
F
To protect your product against power
surges, we recommend the use of a power
protection device (Surge Protector).
G
To reduce the risk of fire, electric shock and
injury to people, note the following:
• Do not use this product near appliances
that use water, a swimming pool or in a wet
basement.
• Do not use the machine during an
electrical storm (there is the remote
possibility of an electrical shock) or to
report a gas leak in the vicinity of the leak.
• Do not dispose of batteries in a fire. They
may explode. Check with local codes for
possible special disposal instructions.
H
Caution - To reduce the risk of fire, use only
a No.26 AWG or larger telecommunication
line cord.

Advertisement

Table of Contents
loading

Table of Contents