Brother MFC-9420CN User Manual page 129

Chapter C
ERROR MESSAGES
ERROR MESSAGE CAUSE
The machine has a mechanical
Unable to Init.
problem.
(Initialize)
Unable to Print
Unable to Scan
The waste toner pack is full.
Waste Toner Full
C - 4
ACTION
Turn off the machine's power switch and then turn it on
again. If the error message continues leave the
machine for several minutes and then try it again. (The
machine can be turned off for up to 60 hours without
losing faxes stored in the memory. If the machine will
be off longer than 60 hours, you can save the faxes in
your PC. See Transferring faxes to your PC on
page C-5.)
Replace the waste toner pack. (See Replacing the
waste toner pack on page C-32.)