Changing The Remote Codes; Easy Receive - Brother MFC-9420CN User Manual

Changing the remote codes

The preset Fax Receive Code is
preset Telephone Answer Code is #51. If you
want to, you can replace them with your own
codes.
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 1, 4.
Setup Receive
4.Remote Codes
3
Press ▲ or ▼ to select On (or Off ).
Press Menu/Set.
4
Enter the new Fax Receive Code.
Press Menu/Set.
5
Enter the new Telephone Answer Code.
Press Menu/Set.
6
Press Stop/Exit.
Note
■
If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another
three-digit code (such as # # # and 9 9 9).
■
Remote Codes might not work with some
telephone systems.

Easy Receive

51. The When you use this feature you do not have to
press Black Start or Color Start or the Fax
Receive Code
call. Selecting On allows the machine to
receive fax calls automatically, even if you lift
the handset of an extension or external
phone. When you see Receiving on the
LCD or when you hear 'chirps' through the
handset of an extension phone connected to
another telephone wall jack, just replace the
handset and your machine will do the rest.
Note
■
If this feature is set to On , but your
machine does not connect a fax call when
you lift an extension or external phone
handset, press the Fax Receive Code
51.
■
If you send faxes from a computer on the
same phone line and the machine
intercepts them, set Easy Receive to Off .
■
Selecting Off means you'll have to
activate the machine yourself by lifting the
handset of an external or extension
phone, and then press Black Start or
Color Start on the machine.
—OR—
by pressing
machine. (See Operation from extension
telephones on page 6-6.)
1
If it is not illuminated in blue, press
2
Press Menu/Set, 2, 1, 3.
3
Use ▲ or ▼ to select On (or Off ).
Press Menu/Set.
4
Press Stop/Exit.
Receiving a fax
51 when you answer a fax
51 if you are not at your
(Fax).
Setup Receive
3.Easy Receive
6
6 - 5