Canon Satera LBP9500C User Manual page 87

Be sure to match the setting in the printer driver.
Normally, you do not need to change the settings for the printer driver because the
default setting for [Paper Type] in the printer driver is set to [Printer Default].
If you want to change the settings for the printer driver, match the setting and [
If they do not match, the message <
In this case, the setting for [
pressing [
For users who do not use the printer driver
When you are printing from an operating system on which you cannot use the printer
driver (such as MS-DOS and UNIX), match the setting for [
type of the loaded paper.
When [
The printer performs printing without checking the paper settings in the printer driver.
Make sure that the paper specified in the printer driver matches that loaded in the
multi-purpose tray before using the printer.
1
Press [
2
Select [
press [OK].
3
Select a paper type using [
 The paper type for the multi-purpose tray is specified.
86
] in the control panel.
] ( ), allowing you to continue printing.
] is specified
] (
> appears.
] is changed to that in the printer driver by
).
] using [ ] and [
] and [
] and the
], and then
], and then press [OK].