Canon Satera LBP9500C User Manual page 134

Message
<Auto Error Skip>
Cause 1 The size of the paper loaded in a paper source is
different from the following settings.

Setting for [Output Size] in the [Page Setup]
sheet in the printer driver

[
Solution Specify the setting properly.
Cause 2 When the following settings in the
are set to [
edges are 297.0 mm or less is loaded in portrait
orientation and printed (only when the LIPS LX
printer driver is used).


Solution Load the paper in landscape orientation, then
print again.
Cause 3 When the LIPS LX printer driver was not used,
custom size paper was loaded in landscape
orientation to be printed.
Solution Load the paper in portrait orientation, then print
again.
Cause 4 [
options) is set to [
Solution Set [
Cause The printer received 2-sided printing data of
paper sizes (including the orientation) or paper
types unavailable for automatic 2-sided printing.
Solution 1 Press [
However, the data on each side is printed on two
pages.
Solution 2 Perform the following procedure.
1. Perform a soft reset.
- "Canceling a Job" (See p. 119)
2. Change the setting to a paper size or type
available for automatic 2-sided printing, and
then print again.
Cause and Solution
] or [
] in the
], custom size paper whose long
] in the
].
] to [ ], and then print again.
] ( ) to continue printing.
Menu
menu
menu (
133