Canon Satera LBP9500C User Manual page 82

4
When loading labels or coated paper, fan them a few sheets at
a time, and then align the edges.
Thoroughly fan in small batches.
CAUTION
Be careful when handling paper.
Handle paper carefully not to cut your hands with the edges of the paper.
IMPORTANT
Be careful when handling labels or coated paper.

If you are using labels or coated paper, fan them thoroughly and load them again.
If they are not fanned enough, multiple sheets of paper may be fed at once,
causing paper jams.

When fanning or aligning coated paper, try to hold the edges to avoid touching the
printing surface.

Take care not to mark or stain the printing surface of coated paper with
fingerprints, dust, or oil. This may result in poor print quality.
5
Gently load the paper stack under the load limit guides (A)
until it touches the back of the tray.
Make sure that the paper stack does not exceed the load limit mark lines (B).
(B)
Tap the edges on a flat
surface a few times.
(A)
81