Canon Satera LBP9500C User Manual page 14

    Transparency
This printer can print A4 and Letter size transparencies.
IMPORTANT
Precautions when using transparencies

Transparencies can only be printed in black and white.

Thoroughly fan the transparencies before loading them as they may stick to each other.

Take care not to mark or stain the printing surface of the transparencies with
fingerprints, dust, or oil.

The print speed drops when printing on transparencies.
    Label
This printer can print labels of the following sizes.
However, it is recommended to use A4 or Letter size labels for the optimum print quality.

Standard paper size: A3, B4, A4, B5, A5, 12 x 18, Ledger (11 x 17), Legal, Letter,
Executive

Custom paper size: Short edges 76.2 to 320.0 mm; Long edges 127.0 to 457.2 mm

Long size: Short edges 210.0 to 297.0 mm; Long edges 457.3 to 1,200.0 mm
IMPORTANT
Precautions when using labels

Using the following types of labels may result in paper jams that are difficult to clear or
may result in damage to the printer.
- Peeled labels or partly used labels
- Coated labels that are easily peeled off from the backing sheet
- Labels with uneven adhesive

The print speed drops when printing labels.
NOTE
When printing labels
Depending on the label type, the output paper may curl excessively. In this case, perform
printing using either of the following methods.

Taking out one sheet at a time each time it is output

Changing the loading orientation of the labels before printing
- If the labels curl when they are loaded in portrait orientation, load them in landscape
orientation.
- If the labels curl when they are loaded in landscape orientation, load them in portrait
orientation.
    Coated paper
This printer can print coated paper (100 to 220 g/m
However, it is recommended to use A3, A4, or Letter size coated paper for the optimum
print quality.

Standard paper size: A3, B4, A4, B5, A5, 12 x 18, Ledger (11 x 17), Legal, Letter,
Executive

Custom paper size: Short edges 76.2 to 320.0 mm; Long edges 127.0 to 457.2 mm

Long size: Short edges 210.0 to 297.0 mm; Long edges 457.3 to 1,200.0 mm
2
) of the following sizes.
13