Canon Satera LBP9500C User Manual page 132

Message
<Auto Error Skip>
Cause The printer is waiting to print cleaning paper.
Solution Load A4 or Letter size paper in the multi-purpose
tray, and then press [
Cause 1 The fixing unit is not installed or is not installed
properly.
Solution 1 Open the right cover and check if the fixing unit is
installed.
Solution 2 Install the fixing unit again. If the message
appears even after installing the fixing unit again,
contact your local authorized Canon dealer for
servicing.
Cause 2 The fixing unit for this printer is not installed.
Solution Replace the fixing unit with that for this printer.
Cause The output tray is filled to the limit.
Solution Remove the paper in the output tray.
Cause Paper of the size specified in the application is
not loaded in the paper source (in all the paper
sources when [
the specified paper source when the setting is
fixed).
Solution 1 Refill or load paper.
Solution 2 Press [
source for the same paper size or larger paper
size.
Cause and Solution
] (
] is set to [
], and then select other paper
).
] and in
131