Error Status - Canon LBP-1120 Service Manual

Laser beam printer
Hide thumbs Also See for LBP-1120:
Table of Contents

Advertisement

Message area: Getting status
Error message area: Please wait a moment
Content: The printer has not received the port status, as the local port to which the printer is connected has just been
switched from another printer.

4. Error status

Indicates errors have occurred on the printer.
When multiple errors occur, an error with the highest priority will be indicated first. When the first error is cleared,
then an error with the second high priority will be indicated.
When an error occurs and then is cancelled in the middle of printing, the printer will resume printing on the on-
going page.
The following describes the messages for the Status Not Available. The messages are listed from the higher priority
to lower priority.
Message area: Port Busy
Error message area: The port is being used by another device.
Content: The port is being used by another device.
Action: Check the port whether the correct printer is connected to it. If not, connect the correct printer to the port.
Message area: Check Printer/Cable
Error message area: Check the following. Is the printer switched on? Is the printer cable connected?
Content: The printer has become incommunicable during printing.
Action: Check the printer by following the instructions indicated in the Error message area, and perform the trouble
shooting.
Message area: Incompatible Printer
Error message area: The wrong printer is connected.
Content: The printer is not LBP-1120.
Action: When you use a printer other than LBP-1120, make sure to switch to the driver to which you are to connect.
Message area: Clear Paper Jam
Error message area: 1.Open cover 2.Remove toner cartridge 3.Remove jammed paper
Content: A paper jam has occurred in the printer.
Action: Follow the instructions indicated in the Error message area.
Message area: Clear Paper Jam
Error message area: 4.Replace toner cartridge 5.Close cover
Content: A jam has occurred and then the cartridge cover has been opened.
Action: Follow the instructions indicated in the Error message area.
Message area: Close Printer Cover
Error message area: None
Content: The cartridge cover is open.
Action: Close the cartridge cover.
Message area: Check Toner Cartridge
Error message area: None
Content: The toner cartridge is not present in the printer. Or, the cartridge is not installed correctly.
Action: Set the cartridge correctly.
APPENDEX
A - 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents