Canon LBP-1120 Service Manual page 115

APPENDEX
Message area: Change paper to xxx
Error message area: Change paper to xxx or force to print on yyy.
Content: The paper to be printed (yyy), recognized by the driver, differs from the specified paper (xxx).
Action: Switching the paper to xxx causes the printer to automatically resume printing. Or, clicking the Resume Job
button causes the printer to resume printing with the present paper.
Message area: Add xxx Paper
Error message area: No paper loaded in printer
Content: Print paper is not set in the printer.
Action: Set print paper in the printer.
Message area: Printing Failed
Error message area: Data transfer to the printer was too late or a data transfer error occurred. Perform the following.
1.Discard last printed page. 2.Resume printing.
Content: Data transfer to the printer was too late. Or, the printer cable is disconnected or the port is connected to
another printer during printing.
Action: If you follow the instructions indicated in the Error message area, the printer will print with lower resolution.
Message area: Insufficient Memory
Error message area: Quit all unnecessary applications running on the machine to which the printer is connected.
Content: The printer cannot obtain enough work memory for the language monitor.
Action: Follow the instructions indicated in the Error message area.
Message area: Service Error
Error message area: Printer Error. Contact the Shop the Printer Was Bought From.
Content: A service error has occurred in the printer engine.
Action: Refer to Chapter 4 "Troubleshooting."
A - 10