Canon LBP-1120 Service Manual page 61

CHAPTER 3
C. Feed Assembly
1) Remove the engine controller assembly. (See VII-
C of Chapter 3.)
2) Free the 2 claws, and remove the 2 gears and the
screw.
[1]
[1] Claw
[2] Gear
Figure 3-3-3
3) Push the 2 claws, and remove the bushing.
[1]
[2]
[1] Claw
[2] Bushing
Figure 3-3-4
3 - 6
4) Remove the 2 screws, and disconnect the 2
connectors; then, remove the feed assembly.
[2]
[2]
[1] Screw
[2] Connector
[3] Feed assembly
[1]
[3]
Figure 3-3-5