Table of Contents
Advertisement
Part 3: Operating Instructions
3) Replacing the cartridge
Open the printer's front cover and the carriage moves to the replacement position.
Then flip up the cartridge lock lever and remove the cartridge. Install another
cartridge by following "Installing the cartridge" above. Always store an unused BJ
cartridge in the BJ cartridge container. The scanner cartridge should be stored in
the soft case. The BJ cartridge may be stored alternately in the BJ cartridge
container.
CAUTION
1.3.4 Scanner cartridge precautions
Do not touch the scanning head of the scanner cartridge as it may affect the quality
and ability of the scanning operation. When cleaning the scanner lens, wipe gently
with a soft damp cloth and wipe off any excess moisture with a soft dry cloth or paper.
To avoid damage caused by miscontact or static charge, do not touch the contact
terminals. The scanner cartridge cannot be disassembled, reassembled, or washed.
If the printer has been operating for a prolonged period, the BJ cartridge's
aluminum plate will get hot. When the aluminum plate becomes too hot,
the carriage will not move to the cartridge replacement position. In this
case, close the front cover, and wait for a few minutes before replacing the
BJ cartridge. Do not move the carriage by hand.
Scanning Head
Figure 3-7 Scanner Cartridge
Contact Terminals
3-6
BJC-2000
Advertisement
Table of Contents
