Table of Contents
Advertisement
Part 5: Maintenance
4.Waste Ink Full
Error
5.Temperature
Sensor Error
6.Carriage
Control Error
<Cause>
The waste ink absorbers' estimated waste ink amount
has reached 100%.
<Suspected Parts>
<Measures>
1.Reset the EEPROM and replace the bottom
cover unit.
2.Replace logic board.
<Cause>
Thermistor is abnormal.
<Suspected Parts>
<Measures>
Replace logic board.
<Cause>
The printing position correction value cannot be
detected.
<Suspected Parts>
Carriage motor, logic board, home
<Measures>
See countermeasures for home position sensor
error.
5-14
Waste ink absorbers, logic board
Thermistor
position sensor
BJC-2000
Advertisement
Table of Contents
