Table of Contents
Advertisement
BJC-2000
2. MACHINE PRECAUTIONS
2.1 Precautions for Handling BJ Cartridges
2.1.1 Turning the printer ON/OFF
The printer will automatically cap the cartridge heads one minute after printing
operations are completed, to prevent the ink from leaking and drying out.
When unplugging the power cord, wait at least one minute after completing an
operation such as printing, feeding paper, cleaning the print head, etc.
If the power cord is accidentally unplugged before one minute has passed, replug the
AC adapter, and wait for more than one minute before unplugging the power cord.
CAUTION
2.1.2 When the printer is not in use
BJ cartridges should be stored either installed in the printer or in the BJ cartridge
container.
CAUTION
2.1.3 Transportation Precautions
When carrying or transporting the printer, keep the BJ cartridge stored in the BJ
cartridge container.
This prevents the ink from leaking and drying out in the nozzles.
2.1.4 Ink electroconductivity
The ink in the BJ cartridge is electroconductive. If ink leaks into the printer's
mechanical parts, use a damp paper towel, etc., to wipe clean. If it leaks into the
printer's electrical components, use tissue paper, etc., to wipe clean completely. If ink
gets into the IC chips on the PCB and it is difficult to clean, replace the PCB.
CAUTION
If the nozzles are not capped, the ink may leak and dry out causing the
nozzles to clog.
If the BJ cartridge is removed from the printer or BJ Cartridge Container,
the ink may leak and dry out causing the nozzles to clog.
If ink has leaked inside the printer, do not plug in the power cord. It may
damage the circuitry.
Part 1: Safety and Precautions
1-5
Advertisement
Table of Contents
