Precautions For Safe Transport Of The Machine - Canon Pixma MX520 Series Online Manual

Precautions for Safe Transport of the Machine

When relocating the machine, make sure of the following.
Important
When sending the machine for repair
Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material
to ensure safe transport.
With the FINE cartridge left installed in the machine, press the ON button to turn off the power. This allows the
machine to automatically cap the print head, thus preventing it from drying.
After packing, do not tilt the box containing the machine or turn it on its side or upside down. Doing so may cause
the ink to leak during transport and cause damage to the machine.
When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP" to keep the
machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".
1. Turn the machine off.
2. Confirm that all the lamps on the operation panel are off and unplug the machine.
Notice for Unplugging the Power Cord
Important
Do not unplug the machine while any lamp on the operation panel is lit or flashing, as it may cause malfunction
or damage to the machine, making the machine unable to print.
3. Retract the paper output support, then close the paper output tray. Retract the paper support
with the output tray extension closed.
4. Close the front cover.
5. Disconnect the printer cable from the computer and from the machine, then disconnect the
power plug from the machine.
6. Use adhesive tape to secure all the covers on the machine to keep them from opening during
transportation. Then pack the machine in the plastic bag.
7. Attach the protective material to the machine when packing the machine in the box.
216