Print Quality Problems; Paper Loading Problems - Canon BJ-10sx User Manual

Print Quality Problems

Paper Loading Problems

If your print quality is not what you expect it to be, check the following
list for your problem and a possible remedy.
Most probable
Print results
cause
Blurred Paper type
character
Faded print Print head is clogged
or out of ink
Light Printer is in
characters economy mode
White Print head is clogged Clean the print head.
streaks
Dots missing Print head is clogged Clean the print head
Irregular Print head is clogged Clean the print head
dots
Print appears Paper thickness dial
dirty needs to be adjusted
The print head cleaning procedure is described later in this chapter.
NOTE: If you are using Windows and your output appears jagged, run
the printer setup program and make sure the resolution setting in 360 x
360 dpi.
To avoid paper loading problems, follow these guidelines:
Only use paper that matches the printer's specifications. See
Appendix A, Printer Specifications, for details.
Make sure the inner cover is closed.
Make sure the paper release lever is pressed all the way down.
Make sure the sheet of paper is straight in the printer.
Remedy
Try a different paper type; use
paper that meets the printer's
specifications.
Clean the print head or replace the
ink cartridge.
Set the printer to HQ mode.
Adjust the paper thickness dial for
the type of paper you are using.