Canon BJ-30 User Manual page 133

BJ Mode
When the printer is in BJ mode, you use the FUNCTION settings to control
the printer:
Function
1
2
3
4-5
6
7
8
9
10
11
12
13
14
15-18
19
1A
FUNCTION 1: Horizontal print position
Use this FUNCTION setting to change the horizontal print position
according to the size of your paper. If you are using letter-size paper or
envelopes, set this FUNCTION to OFF; the left margin will be 0.25 inch
(6.4 mm). If you are using A4-size paper, set this FUNCTION to ON; the
left margin will be 0.13 inch (3.4 mm).
FUNCTION 2: Page length
If you are using letter-size paper, set this FUNCTION to OFF; this sets the
page length to 11 inches. If you are using A4-size paper, set this
FUNCTION to ON; this sets the page length to 12 inches.
124
Customizing the Printer
Description OFF
Horizontal print Letter size or
position envelope
Page length 11 inches
Text scale mode Disabled
Top margin See following descriptions
Smoothing mode 360 dpi
Automatic power Disabled
off mode
Font typeface Disabled
lock mode
Input/download 35 KB/0 KB
buffer
Automatic line Carriage return
feed (LF) (CR) only
Automatic carriage Line feed
return (CR) (LF) only
Alternate Graphics Disabled
Mode (AGM)
Not used
Character set Set 1
Code page See following descriptions
Automatic Disabled
emulation switching
mode
Low ink warning Disabled
ON
A4 size
12 inches
Enabled
720 dpi
Enabled
Enabled
3 KB/32 KB
CR with LF
LF with CR
Enabled
Set 2
Enabled
Enabled
Chapter 8