Printing A Test Pattern - Canon BJ-30 User Manual

Printing a Test Pattern

To check that you have properly set up the printer, you can print one of the
printer's test patterns. The test patterns are described in detail in Chapter 3,
Using the Printer. For now, print the Demo pattern.
1. Make sure that the sheet feeder contains a stack of paper.
2. Make sure that the printer is turned on.
3. Press and hold down the
The word
starts blinking.
4. Press the
display.
5. Press the
After printing the Demo pattern, the printer stays on-line.
N
If lines are missing in the printed text or if there is no ink on the paper,
check that the BJ cartridge is installed correctly (as described previously in
this chapter). You may also need to clean the print head; see Cleaning the
Print Head on page 79 for instructions.
Chapter 2
button until the printer beeps twice.
MENU
disappears and the number shown on the display
FONT
button five times until the number 6 appears on the
button to start the Demo pattern.
MENU
21
Setting Up the Printer